PDA

View Full Version : need help....


ac11998
09-20-2006, 07:08 PM
i have a 2003 1800 c. my aft cylinder is not firing. tried the ground fix. it did not help. i do not have any add ons. completely stock. the bike was laid down. please help, need to ride.

syhman
09-20-2006, 07:36 PM
did you check the coil to see if the wire came off?

ac11998
09-20-2006, 07:57 PM
yeah all connections are good

i still need help. i swapped coils and that still did not work. all the connections are good. battery is putting out 12.8 volts.

ac11998
09-22-2006, 01:53 AM
does anyone have an idea. i thought i would get a few responses.

syhman
09-22-2006, 03:19 PM
Try the VTXOA .com board. there's a lot of help to be had over there also

DAR
09-22-2006, 06:19 PM
Have you inspected the main wiring harness under the seat? The wires are pretty thin and break or pull out easily.

syhman
09-22-2006, 06:34 PM
Did you remove the spark plug and check it to see if its in one piece ?

ac11998
09-24-2006, 10:04 AM
i have isolated the problem. it has something to do with turn signal in front. when i take the right front bulb out, engine runs like a champ. go figure huh. so right now i am running without turn indication. at least im riding untill snow starts to fall.