4 Way Hazard Flashers

[Bear]

Is there a kit to allow me to turn on 4 way Hazard Flashers? I have seen it on Harley bikes, but no other brands

[Big-X]

Here is one that I was thinking of ordering: http://www.tricktape.com/index.asp?PageAction=VIEWPROD&ProdID=2617

[Retro Rocket]

If you do buy it and install it let me know how it works. Seems like a very simple solution. :cheers:

[Bear]

I like the looks of theat Kisan system. I have both my 1800R and my wifes 1300R to do. May end up as Christmas presents

[joekeys]

You have it if you install Signal Minder and also wigwag flashers.

[ROSHOLT1]

Is the Signal Minder plug and play or some wiring to do.

[Drywallman]

Built my own Signal Minder with a couple of diodes and a piezo beeper, works great. I may do a little more wiring and add a switch so that I can have Emergency flashers also.

[BULLDOG1]

I put the signal minder on a couple of months ago.it has been working fine. It is somewhat plug and play for just directionals, but if you want hazards and escort lights there is some other easy wiring. every thing is included. the wire splices included are a little cheap you may want/need to solder if you dont get a good connection. the springs for the switch return needed to be cut and took a few trys to get it right. the whole project less than 30 min.

over all a good add on

[joekeys]

I installed Signal Minder on my VTX 1300R and it was fine but make sure you run a ground to the battery. I grounded mine to the frame and sometimes it wouldn't work right. I called the support and they suggested grounding to the battery and I've had no more problems. You have turn signal cancellation and 4 way flashers and wig wag flashers.