Clayton Mod

[Jeff5886]

I am doing the clayton mod on my 2006 1300R and I just need to know if there is a second plate behind the plate that I drilled my holes in.

Also, how far back do I need to drill the holes. I just made 5 1/2inch holes symetricly around the exhaust pipe. How deep do I need to go?

[MerwinT]

You are finished. You drill through the back plate only.

[marlon5656]

I am doing the clayton mod on my 2006 1300R and I just need to know if there is a second plate behind the plate that I drilled my holes in.

Also, how far back do I need to drill the holes. I just made 5 1/2inch holes symetricly around the exhaust pipe. How deep do I need to go?
could u post pics cause i have a f and i drilled with an 18 inch 1/2 biy through the rear of the pipe and no difference.

[poolmaster79]

The farther you drill, the deeper the sound. I used a 12" bit and went as far as I could go. Awesome sound.

Check out this thread. It's 16 pages of posts about the Clayton Mod..

http://www.vtxcafe.com/showthread.php?t=855

[pastordave]

Go deep. You won't get the rumble from just the first plate.

[marlon5656]

Go deep. You won't get the rumble from just the first plate.
i used a 18 inch and there was only one. i have a f which is different from the c

[jessevtx]

yes there is a second baffle about 10 inches in there is also a support bracket in between the two baffles.