Tech Session Bama Tech Session


Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Bama Tech Session

  1. #1
    Join Date
    Aug 2010
    Location
    Scottsboro, AL
    Age
    57
    Posts
    4,818
    Post Thanks / Like

    47b20s0 Bama Tech Session

    After much ( well a little ) deliberation with other members the Bama Tech Session will be held Saturday April 1 at my place in Scottsboro AL. For those of you that have attended in the past you pretty much know the drill. We'll have breakfast at the Western Sizzler in Scottsboro AL at 8am and then get to work. You don't have to be there at 8 but by 9am we'll get started and so depending on what work you may need done then the earlier the better. Keep in mind that stem bearing replacements are about a 2 -3 hour job and if you need your valves checked your bike will need to sit for about 4 hours to allow it time to cool. Any other work that needs to be done such as oil changes and the like don't take too much time and we will be working on Sunday morning until around noon as well.
    So if you are planning on coming and need some work done to your bike please post up here and list what type work you'll need done. If your coming just to watch or hang out with us then post up here as well. Everyone is welcome.
    I'll have soft drinks and beer on hand and of course if you want to bring an adult beverage with you that's fine but please drink responsibly. We usually will try and break for lunch and either grab some pizzas or go out for BarBQ. However sometime we're so busy the time gets away from us and we work right though lunch, but nevertheless, we will try to make time for it.
    If you need work done that requires parts get busy now finding out exactly what you need and get it ordered in time. If you're unsure of what parts you might need then post up and ask. We'll try to make sure that you get the correct items for your job. Also be sure to have any fluids that you may need...oil, fork oil, coolant, brake fluid or whatever. I'll have grease, lithium grease, moly paste and some items like that on hand but be sure to check before hand. Nothing worse than getting elbow deep into something and then finding out we don't have what we need to finish.
    If you've never attended in the past then I encourage you to come by and check it out. It's a lot of fun and lots of good guys and gals around working on bikes and just having a good time. And you never know, you might just learn something or even better teach something.
    So looking forward to seeing everyone and again, please post up if your coming so I can get a head count.
    See you then!

  2. #2
    Hiramsaint's Avatar
    Hiramsaint is online now Deplorable member Georgia Riders Group
    Join Date
    Mar 2014
    Location
    Hiram, Ga.
    Posts
    4,116
    Post Thanks / Like
    Looking forward to it hawk. PM me if you need me to bring anything. I ordered my stem bearings 2 days ago so I'll be on the list for that. Should I bring a Dremel for the races?

  3. #3
    Join Date
    Aug 2010
    Location
    Scottsboro, AL
    Age
    57
    Posts
    4,818
    Post Thanks / Like
    I have one.

  4. Remove Advertisements
    VTX Cafe
    Advertisements
     

  5. #4
    Join Date
    Aug 2010
    Location
    Scottsboro, AL
    Age
    57
    Posts
    4,818
    Post Thanks / Like
    Bump for this.

  6. #5
    Join Date
    Aug 2010
    Location
    Scottsboro, AL
    Age
    57
    Posts
    4,818
    Post Thanks / Like
    Just another bump for this. If you're thinking about coming please let me know.

  7. #6
    Join Date
    Jul 2011
    Location
    Johnstown, Pa.
    Posts
    10,810
    Post Thanks / Like
    Thats more Dickle for you, if few show.

  8. #7
    Fishingfoolemjak's Avatar
    Fishingfoolemjak is online now Mental Member Tennessee Riders Group
    South Carolina Riders Group
    North Carolina Riders Group
    Join Date
    Jul 2016
    Location
    Sylva, NC
    Age
    43
    Posts
    2,937
    Post Thanks / Like
    Quote Originally Posted by PaXman11 View Post
    Thats more Dickle for you, if few show.
    Ummmmmm

  9. #8
    Join Date
    Jul 2011
    Location
    Johnstown, Pa.
    Posts
    10,810
    Post Thanks / Like
    Quote Originally Posted by Fishingfoolemjak View Post
    Ummmmmm
    Ask Hawk. His preferred adult beverage. For kickin' back & sippin'.

  10. ThanksFishingfoolemjak thanked for this post
  11. #9
    Join Date
    Aug 2010
    Location
    Scottsboro, AL
    Age
    57
    Posts
    4,818
    Post Thanks / Like
    Just another bump for this. So far it doesn't look like we'll have too much to do. A couple of bearing replacements and that's about it. Maybe we'll actually have time to ride a little.

    So...this is fast approaching , if you're thinking about coming and need any work done please post up.

  12. #10
    Join Date
    Aug 2010
    Location
    Scottsboro, AL
    Age
    57
    Posts
    4,818
    Post Thanks / Like
    just another bump.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Similar Threads

    1. Bama tech session date
      By hawkvtx in forum General VTX/Motorcycle Topics
      Replies: 13
      Last Post: 02-24-2017, 01:13 PM
    2. Tech Session: Bama Tech Session April 30-31
      By hawkvtx in forum Regional / State Tech Sessions
      Replies: 49
      Last Post: 05-03-2016, 09:43 PM
    3. Tech Session: 2015 Bama Tech Session
      By hawkvtx in forum Regional / State Tech Sessions
      Replies: 125
      Last Post: 05-30-2015, 10:07 AM
    4. Tech Session: Bama tech session
      By hawkvtx in forum Regional / State Tech Sessions
      Replies: 239
      Last Post: 03-18-2013, 12:45 AM
    5. Bama Tech Session Pics
      By hawkvtx in forum General VTX/Motorcycle Topics
      Replies: 19
      Last Post: 03-15-2013, 05:55 PM

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •