[Fireruh]

I just got my Cobra Speedster Longs for my 1300 retro. I have a stock air box and have glenns A/F tool. My question is, how many turns do I need and is that from all the way in or from where it is set for stock. Thanks in advance.

[arazla]

You should only need to go 1/4 to 1/2 turn out (lefty loosy) for the new pipes...
If you get messed up and need to start over go all the way back in (righty tighty) till it seats lightly (Don't overtightened) & back out 2 1/2 turns.

From here you will want to check the plugs after you run them for about 15 miles at a good clip. Your looking for a light brown/tan color.

[glendevries]

Originally Posted by arazla You should only need to go 1/4 to 1/2 turn out (lefty loosy) for the new pipes... If you get messed up and need to start over go all the way back in (righty tighty) till it seats lightly (Don't overtightened) & back out 2 1/2 turns. From here you will want to check the plugs after you run them for about 15 miles at a good clip. Your looking for a light brown/tan color.

Thanks arazla. You said it better then I could.
Glen

[arazla]

Originally Posted by glendevries Thanks arazla. You said it better then I could. Glen

No glen... thank you for the goods...

Everything I have gotten from you guys is just great!
CPR & Carb tool are some of the best money spent to date!

[Fireruh]

Thanks fellas, I will give it a try and see what happens.

[xdanman]

Either go in all the way and back out 2 1/2, or stock is about 1 5/8.
Do the math. Good luck.