Honda VTX 1300 / VTX 1800 Motorcycles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. General VTX/Motorcycle Topics
    So, I recently did the Clayton Mod with 7 1/2" holes through the first baffle. Then I cranked it up and it idled with a nice sound, then when you rev on it, sounds a bit "tinny". So I decided to punch another hole, but 1 through the second baffle with a 15" 1/2" drill bit. Sound MUCH better and...
  2. Honda VTX 1300 Forums
    Okay guys, I went out today and got the 1-3/4" Hole Saw to drill out the baffles. I did the before video and even video taped drilling out and removing the baffle. I can not believe how easy this was. I just put the hole saw over the baffle and drilled, it took all of 30 seconds per pipe...
  3. Clayton Root Muffler Modification with muffler drilled out also

    clayton mod with three holes in the first plate and three holes in the muffler iteself.
  4. Clayton Root Muffler Modifified version fiinished

    Clayton Root Muffler Modification with 5 holes drilled all the way through to the muffler itself and the muffler tip and first plate cut off. Sounds much better this way!
  5. Clayton Root Muffler Modification modified version

    Clayton Mod with 5 holes all the way through the muffler and the muffler tip cut off.
1-6 of 6 Results