Honda VTX 1300 / VTX 1800 Motorcycles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Honda VTX 1300 Forums
    Good afternoon Ladies and Gents, I've got a predicament, and I would like your thoughts on what might be going on in my particular scenario. I've done a bit of research, and particularly this thread that outlines what to look for in a question of rich/lean...
  2. Honda VTX 1300 Forums
    Hey guys, I've been a forum voyeur for a while, but finally making my first post. I apologize if this is somewhere else in the forum, I've looked pretty hard. I own a 2007 VTX1300C. I recently installed the Glens Permanent A/F screw and backed it out to 2 1/2 turns, and man. It's solved...
  3. Honda VTX 1300 Forums
    Has anybody tried to just cut out the entire black plate and pull the tail pipe from the 1300 C slash pipes? I imagine it would be similar to a kiwi mod, but no removal of the tip, and there's still the first baffle untouched. I'm curious to see if it would look and sound right.
  4. Clayton Root Muffler Modification with muffler drilled out also

    clayton mod with three holes in the first plate and three holes in the muffler iteself.
  5. Clayton Root Muffler Modifified version fiinished

    Clayton Root Muffler Modification with 5 holes drilled all the way through to the muffler itself and the muffler tip and first plate cut off. Sounds much better this way!
  6. Clayton Root Muffler Modification modified version

    Clayton Mod with 5 holes all the way through the muffler and the muffler tip cut off.
1-7 of 7 Results