Honda VTX 1300 / VTX 1800 Motorcycles Forum banner
idle
1-9 of 9 Results
  1. Honda VTX 1800 Forums
    This is just one of those silly questions that could have a multitude of answers. Those who have read my posts know that I am new to my VTX 1800. But since I have been making maintenance changes to him he has taken on kind of a cocky persona. He is riding way easier and seems to be way happier...
  2. Honda VTX 1300 Forums
    I have an 05 1300s that won't idle without some of the choke/enricher pulled out. Then, when you get on the throttle and let off it stalls. I have stock everything except a Glenn's a/f screw. I cleaned the jets, cleaned the plugs, ran seafoam, and replaced vacuum lines. The only other thing...
  3. Honda VTX 1300 Forums
    Now that I know how to post a video - as a public service announcement - I'd like to post Gonzo1970's YouTube video for the purpose of 'comparison-setting' your idle speed to proper 900 rpm, if you don't have a tachometer. Just play the video/audio on your phone, tablet, or laptop and adjust...
  4. Honda VTX 1300 Forums
    sup, everyone! i just bought a used VTX 1300c .. i took it for a ride about 7-10 miles and by the end of my ride it happened that i ran out of gas but i managed to to fuel it up as i was close to a gas station. when i got to my destination, i parked it for about 3-4 hours. when i got back it...
  5. *** The Shop ~ I NEED URGENT MOTORCYCLE HELP!! ***
    Hello everyone, I am not sure if this is even an issue. My ignorance may shine through on this one. In the last couple of days, I made two changes to my bike. The first change was that I put some Thunder Monster baffles in my Cobra Long Shots. The second change was that I swapped out my...
  6. *** The Shop ~ I NEED URGENT MOTORCYCLE HELP!! ***
    Ok. I already know this was completely stupid so I don't need any of the hagling!:rolleyes: Long story short, while adjusting my idle, I accidentally unscrewed the idle adjustment screw too far. I'm assuming it came all the way out. When it happened, I just screwed it right back in. Now, it has...
  7. Honda VTX 1800 Forums
    Ok. I already know this was completely stupid so I don't need any of the hagling!:rolleyes: Long story short, while adjusting my idle, I accidentally unscrewed the idle adjustment screw too far. I'm assuming it came all the way out. When it happened, I just screwed it right back in. Now, it has...
  8. *** The Shop ~ I NEED URGENT MOTORCYCLE HELP!! ***
    my 2003 vtx-c has idle issues, drops from 900 to 600 rpm when stopped, acts like it wants to stall and you have to give it gas to start it up. Just had the plugs replaced and dyno'd, they say its an idle control module or something like that, but I dont know what it would be on a honda. Any...
  9. Honda VTX 1300 Forums
    I purchased a 03 VTX1300 over the winter. It was running great, though idling a little high. I talked to a mechanic and he recommended I adjust a particular valve. I'm not sure if this is the A/F Valve or not(see below) I adjusted counter clockwise and the idle went down slightly, but it...
1-9 of 9 Results
Top