Honda VTX 1300 / VTX 1800 Motorcycles Forum banner


  1. Question Jetting the carb

    Honda VTX 1300 Forums
    I have my 2004 vtx 1300c that I purchased this past year. the previous owner bought an aftermarket exhaust (Cobra Dragsters), but left the air filter system stock. I just purchased a Kuryakyn Corsair Cleaner that I plan to install. I was hoping for some input on the jetting (jet size and what...
  2. Question Hypercharger -> New Exhaust -> Jetting?

    Honda VTX 1300 Forums
    Have an '07 VTX1300R. I added a hypercharger at the end of last season. It looks nice and seems to make a difference at speed, but I do get the popping on deceleration. I've been advised that it would be better to first add aftermarket pipes with greater airflow before re-jetting (looking at V&H...
  3. Factory Jet Kit Install

    *** The Shop ~ I NEED URGENT MOTORCYCLE HELP!! ***
    Sooo... Here we go again. I just installed the jet kit on the 1300 s, she was backfiring a bit at after the new engine installation. So i changed the intake boots because they were leaking and it seemed to be the perfect time to rejet the carb. But here is the problem. It is dying quickly...
  4. Help, jetting with new intake and pipes

    Honda VTX 1300 Forums
    Hey everybody I need some help I have put new pipes and a new intake on my 07 vtx 1300c intake is an arlen ness big sucker and the pipes are cobra dragsters I did rejet it with a cobra jet kit it only came with a main jet and not a pilot jet so I dont know if that is what I need to change or not...
  5. Big Air Kit

    Performance Upgrades/Mods
    So I ordered a Baron Big Air kit for my 2005 VTX-1300S. When I got the kit my needle was in the same plastic compartment as the pilot jet. Looks as if it was shaken around pretty good as the needle has two very small nicks on it. I have two questions: 1. Will small nicks (scratches) on the...
  6. Jetting problems

    Honda VTX 1300 Forums
    Hye all, purchased my 2007 VTX 1300R Last summer. The guy i bought it from put a Cobra Speedster Exhaust and a HyperCharger air intake and im pretty sure he never had it re-jetted, Especially after last weekend i took an Advanced Rider Course here in PA. I had to ride the whole way there with...
  7. HELP- Bike runs poor after jetting

    Honda VTX 1300 Forums
    Please Help - Ok, I have a 05' 1300C with a kuryakyn pro hypercharger and free flowing pipes. I jetted my carb with a dyno jet kit-195 main jet, needle with shim on third indent, and af screw 2 1/2 turns out. I took the bike for a spin and runs great in all gears for first 1/4 of...