[AgainFaster]

Looking at purchasing the CP Phantom 1" T-Bar 8" riser.

http://www.phatperformanceparts.com...Phantom_1_Inch_T_Bar_for_Honda_p/cph-0800.htm

I want higher and slightly pulled back bars from where the 1300c stocks are, but am worried 8 is too high, as it is a 5 inch increase from stock. Does anyone have these bars or something similar with pics so I could get a better idea? Of course their product image is one with no height perspective. Could use some help! Thanks in advance.

 

[billh64501]

drag specialties

Got tired of leaning forward on my "C", picked up drag specialties 1 1/2" bars with an 8" pull back, love em. Check my profile picks.

 

[doug48317]

I went with the CP Punishers which are 8" rise & 13" pullback and I couldn't be happier. http://www.phatperformanceparts.com/Cruiser_Performance_VTX_1_50_inch_Punisher_Series_p/cph-1105.htm
As much as the #'s sound like a lot they really aren't what you'd think they would be. (if I'm not mistaken the stock C bars have 6" of rise)

 

[SPARKP]

I went with the 1.5" Massive T-Bars with an 8" rise and 7" of pullback. No regrets at all. After you see them on the bike they make the stockers look like bicycle handlebars. Heres a link and pictures:

http://www.phatperformanceparts.com...1_50_inch_VTX_Massive_T_Bars_w_p/cph-1175.htm

 

[justinw156]

Did you have to do anything with your cables to get these bars?

I went with the 1.5" Massive T-Bars with an 8" rise and 7" of pullback. No regrets at all. After you see them on the bike they make the stockers look like bicycle handlebars. Heres a link and pictures:

http://www.phatperformanceparts.com...1_50_inch_VTX_Massive_T_Bars_w_p/cph-1175.htm

 

[SPARKP]

I didn't HAVE TO do anything with the cables because of the handlebar change. I just moved them behind the triple tree because I think it looks cleaner. The stockers will be fine either way. I didn't replace ( with a +4 ) my front brake cable until I did the rake.

 

[John70816]

Little off but....

I put a set of Kewmetal risers on my wife's 1300C and didn't have to redo any cables or wires. There is plenty of slack in the wires in the headlight can and enough play in the cables to allow the 2" pullback with no problems.

 

[Eazy-E]

CP 1105's here and love them. I'm 5'7 and the 13'' pull back is perfect. Caught them on sale for 200.00 and for 52.00, I got the R/S cables and front brake hose from DLP and they fit in the stock locations.

 

[Tigger45]

Thx to every one on this site with riser info for 1300c. It was cost effective and easy to do. Now my riding position is much better!