[lookn4fun]

According to http://www.directlineparts.com/product.asp?pid=5249&str=13

Metzeler tire ME880 200/70HB15 rear tire. Approved for use on the stock VTX1800 Spoke model, VTX1300C, & VTX1300R/S by Metzeler. FREE SHIPPING
Approved for use on the stock VTX1800 Spoke model, VTX1300C, & VTX1300R/S by Metzeler. Fits on stock rim with no modifications.
Our Part #: MET-11014018

I didn't think a 200 would go on a stock rim without some modifications.

 

[WV4LIFE]

I have the ME880 200 on my 04 1300C no problems. Not sure once its ready to replace that I'll put another 200 back on due to the price difference. All the guys on here running darkside as far as I know are running on stock rims so a 200 should be no issue. 5000 miles later and I have had no issues. Fattin' her up!:mosh:

 

[thundrhd]

Do yourself a favor & don't waste money on a 200, trying to "fatten" her up, on a stock rim is a no-go, the rim will pinch in on the sides, and it'll look no bigger than a 180.

 

[WV4LIFE]

Its a personal preference. If you want a 200 get a 200 if you don't then stay stock. A 200 will fit on your stock rim just fine, speaking for 1300C models. No pinching on mine. Like I said I will probably go back to stock size once this tire is ready to replace, money savings only. To each is their own.

 

[thundrhd]

Yes, it is a personal preference, I'm just trying to save the guy about 120$ on tires, it's up to him, I'm just offering advice.

 

[WV4LIFE]

Yeah I am with you there. Save the money and roll stock. Just saying it'll fit, or take the money you save and get some upgrades.

 

[thundrhd]

That's some good advice.:cheers:
Just for reference, the place I buy my tires, the stock runs $149.68(170/80/150
The 180/70/15 costs 142.66....go figure:hmm2:

 

[glendevries]

The 200 load rate is 150 lbs more than the 180. 2up, fairing, touring pack, I need the extra rating.

Enjoy your ride.
Glen

 

[VTXhotic]

200/70-15

I have a 2004 VTX1300c. Looking to put Avon 200/70-15 on rear. Did you have any issues or any mods. I have stock now with just 1/4 " clearance on left between tire and driveshaft. I want to use stock wheel with original equipment.

I have the ME880 200 on my 04 1300C no problems. Not sure once its ready to replace that I'll put another 200 back on due to the price difference. All the guys on here running darkside as far as I know are running on stock rims so a 200 should be no issue. 5000 miles later and I have had no issues. Fattin' her up!:mosh:

 

[retroryder]

Regarding the 200 looking like a 180 on a stock rim, is that true? Youse guys wit 200's, what say you?