[coley]

Please report and dead links so they can be removed or updated.

Thanks to backjudge1300 for doing all the research and taking the time to organize and post all this helpful information.

:cheers:

 

[backjudge1300]

update
added JStars brake pad change thread



This thread is for easy access to common part numbers we all use and need, mods, and links to vendors.

I have *borrowed* all this information from numerous posts that were madeby various Café members.
I take no credit for anything other than assembling this information into this post.
Please let me know if you have a link, mod or something that you feel should be included here.


H4ST Sylvania Head light bulb- Highly recommended
Spark Plugs…..Stock are NGK DCPR6

Exhaust Crush Gasket:
Napa/Victor: F12329orF7283
Walker: 31396
Maremont: G184
Marwill: G647B
Midas: EN1837(New521817)
Imco: 124647
Fel Pro 60569
NEA EX935

Shock Bushing …McMaster Carr 6389K344

Glens A/F Tool….www.glensvtxgarage.com

HicksA/FScrew….http://home.earthlink.net/~hickmachine/products.htm

All_Balls Steering Neck Bearings…..AB-22-1020

.020 shims (#4 washers) for Scar mod…...Radio Shack Part # 64-3022


Oil Drain Plug Crush Washers: 94109-1200 12mm Crush Washer OEM#

Stock Tire Sizes:

R,S,T,C REAR: 170/80-15

R,S,T FRONT: 140/80-17

C FRONT: 110/90-19

Stock Handle Bar Measurements and Info


The following is a list of filter numbers that will work on the 1800 and 1300.
Motorcycle specific filters;

AC Delco PF2135
AMSOIL EAOM-103
FRAM PH6017A
Honda OEM #15410-MCJ-003
K&N KN-204
NAPA Gold 1358
Purolator Motorcycle ML16817
STP 07
WIX 51358

Car filters about 2.5 inches tall;


AC Delco PF1237
Mobil M1-108
NAPA Gold 1365
Purolator L14622
Purolator Pure One PL14622
STP S-02876
WalMart SuperTech ST6607

Car filters about 3.25inches tall;


Super Tech (Wal-Mart) Part # ST7317
AC Delco PF-2057
Bosch 3323
Castrol 7317
FRAM 7317
Mobil 1 M1-110
Motorcraft Long Life FL-821
NAPA Gold 1356
Purolator L14620

Purolator Pure One PL14610
WIX 51356

Synthetic Oils….most use Full Synthetic 5W40 or 10W40.
Just be sure you DO NOT USE energy conserving oil. This will damage the clutch system on the bike. Use only oil that meets or exceeds the manufacturers recommendations. again, DONOT USE energy conserving oil.
There are 2 , repeat 2 oil drain plugs. You must remove them both!
Oil is checked with the bike upright , not on the kickstand with the dipstick just setting on top.
NOT screwed back in.


CharlieDgets credit for this idea: after the first time you check the oil with the bike up on a block of wood or someone holding it upright for you, and you know the level is correct, put the bike back on the kickstand and check the dipstick again.
Scratch a mark on the dipstick where the new full mark is and you can from now on check the oil while the bike is leaning over on the kickstand. Much easier.
Always rub a little oil on the oil filter gasket before screwing it on..



Gunk melted on your pipes? EZ off oven cleaner!!!!

Want a high gloss shine fast? Pledge baby!!
Use the multi surface Pledge and watch her shine!


Quick Links:

Babbitts OEM replacement parts

Honda Motorcycle parts by year and model

Bare Ass Choppers…Many Great walkthroughs and mods… Excellent Site

SCAR Mod …..byScar

Walmart Driving Lights Wiring and Install by matejj

Headlight Aim Adjustments by TheOldFool

Jeffs Power Box Mod by jconrad2

Garage Door Opener Mod ...by brannum

Relay Tray Mod

Clayton Pipe Mod

KIWI Mod

Seat Pin Mod .. offered by backjudge1300

Pair Mod

Stock Seat Modifications....Mean City Cycles

Steering Head Bearing Replacement…

Valve Adjustment…… by Poison

Painting the Engine Fins....by Big-X

Spyker Air Box mod

Ashfords Homemade Air Mod

Ashfords Big Air Breather

Reading Spark Plugs...Lean or Rich?

Chrome Exchange, Fat Tire Kits, Etc …by Stump

Stock part mods, paint and accessories ….by ponyz101
www.crapmods4u.com

Engine Rev Calculation Spreadsheet…by Cornerbanger

Chrome Driveshaft Cover Mod

4 Way Flasher Mod by VTXER13

1300C stock rim with 215/ 65-15 swing arm mod by Horseman8M

Removing the 1300 Gas Tank….By BASSDUDE

Removing the Rear Wheel

Removing/Swapping Final drives …by aVrTsXe

Cobra Speedster Long Installation by itrider

Bub Jug Hugger Installation PIctures

Stripped Airbox Screw Repair...by MSCALES

Horsemans LED run/turn mod

VTX wiring schematic

Progressive Spring Install by M-2

Reading Spark Plugs by twowheelz4ever

Brake Pad Change by JStar




Removing the Stock Emblems
these will come off very easy if they are warm
Use a hair dryer or sit in the hot summer sun and you can slowly twist them off.
Most guys use dental floss and a sawing motion to slice thru the sticky tape
between the badge and the bike. remove glue reside with goof off or the like and wax.


Vendors:

Parts & Accessories


Dyna Beads-http://www.innovativebalancing.com/motorcycle.htm
Glens VTX Garage
http://www.denniskirk.com/
http://www.scootworks.com
http://www.directlineparts.com/
http://www.hdlparts.com/fiche_select.asp
http://www.cruisercustomizing.com/
http://www.hellrisercustoms.com/
http://www.motorcycle-superstore.com/
http://www.cyclegiant.com/
http://www.meancycles.com/
http://www.phatperformanceparts.com/
http://www.jpcycles.com/
http://www.kuryakyn.com/


Fasteners


http://www.mcmaster.com/


Tunes


http://www.gooddeals18.com/
http://motorcycletunes.com/default.asp

Leather & Accessories

http://ussaddlebag.com/index.html
http://www.jafrum.com/
http://www.leatherup.com/
http://www.foxcreekleather.com/
http://www.tourmaster.com/
http://www.roadreadybags.com/
http://www.bossbags.com/
http://www.vikingbags.com/


Windshields


http://www.memphisshades.com/
http://shop.nationalcycle.com/
http://www.rifle.com/
Safety & Education
http://www.ama-cycle.org/
http://www.mrf.org/safety.php
http://www.msgroup.org/articles.aspx

Paint


www.bdscycles.com amazing painter!!

Please let me know of any dead links.
This is an evolving page, so please let me know if you have an idea, link, mod or vendor you would like added here.

Jim

 

[jgb8743]

Great info, thanks for taking the time to do it. The link near the top for the Hicks A/F screw (HicksA/FScrew….http://home.earthlink.net/~hickmachine/products.htm) is dead, but you can still find the screw at the Hicks link near the bottom. Thanks again for the easy info!

 

[Vetteran]

A small addendum

I searched the forum for Brake Fluid type and couldn't find a definitive answer. I checked the Service Manual, it says to only use:

DOT4

 

[jgb8743]

Hate to call out another dead link, but the Dyna Beads link goes nowhere. I searched a handful of sites, and this one seems to be the cheapest, even after shipping, and they come pre-packed in the tubes.

http://www.evolutioncycles.com/

 

[Warlock]

Be good to add info. about switching to led lights and adding the flaher mod from cheapskate riders board http://crapmods.com/phpBB3/viewtopic.php?f=19&t=9090. just a thought. LP

 

[The Coadmeister]

The Bosch 3300 oil filter has the wrong threads. I just tried using it yesterday and had to return it and get the stock oil filter.

 

[canuckvtx2007]

Additional Fastener Link

I searched everywhere to find M10 X 1.25 button head screws long enough to fit Cobra Bungee knobs and a thick baracket for my hard saddlebags.
Finally found M10 x 1.25 80mm at
http://www.a2stainless.co.uk/default.aspx

Stigs Stainless Fasteners in the UK, recieved my order ~1 week.

 

[Supraman762]

The crush washers are missing a 0 in the parts number 94109-12000 is what i believe that they should be.

On a side note, has anyone had luck finding these? I can find the 14000 like goes on the shadows, all day long. But the 12mm is seemingly more difficult to find.

 

[Ir8|Redleg]

Dead Link- Glens A/F Tool….www.glensvtxgarage.com

Dead Link- HicksA/FScrew….http://home.earthlink.net/~hickmachine/products.htm

Dead Link- Engine Rev Calculation Spreadsheet…by Cornerbanger

Dead Link- Chrome Driveshaft Cover Mod

Dead Link- Glens VTX Garage

 

[MPD193]

Here is the link for coolant replacement if someone could please paste it

http://www.vtxcafe.com/showthread.php?t=43157

 

[Mark in St. Louis]

The crush washers are missing a 0 in the parts number 94109-12000 is what i believe that they should be.

On a side note, has anyone had luck finding these? I can find the 14000 like goes on the shadows, all day long. But the 12mm is seemingly more difficult to find.

Earlier this year I went to my local stealer, told them I needed crush washers for my VTX 1300. Paid for them and went on my way. Wasn't until after I got home (and after the stealer closed) that I noticed he had given my the 14mm washers! Was able to pick up a set of 12mm washers at my local Advance Auto, so no riding time lost. Took the 14mm's back to the stealer and changed them out for the right ones, so I'll have them for the next oil change!

 

[backjudge1300]

I have been busy as hell for the last few months and Im sorry I havent gotten this link fixed up. I promise to get on it soon!
Glad to see you guys are using it!
Thanks for the dead link reports and I will get it fixed up soon.
Just been so damn busy lately....

 

[BeefyBeefo]

I have been busy as hell for the last few months and Im sorry I havent gotten this link fixed up. I promise to get on it soon!
Glad to see you guys are using it!
Thanks for the dead link reports and I will get it fixed up soon.
Just been so damn busy lately....

Good to see you back! :mosh::mosh::cheers:
Posted via Mobile Device

 

[WoodyZ]

Awesome job on getting these links organized. I'm in no need for any of them right now, but know they will be invaluable when I do. Thank you

 

[VAtrooper82]

great post brother thank you.

 

[VAtrooper82]

quick question.....
what is the size HEX tool to remove any of the hardware on the bike???

Thanks.

 

[Gator#1]

I have 05 vtx 1300 that I am having a problem. Sometimes when I start it starts fine, but sometimes it starts &within 10 secs. it shouts off. Does not want to restart. Any ideals.

 

[BigEZCrusin]

Moble One M1 110 oil Filter ?

Thanks for all the hard work that went into putting together the common parts list numbers :mosh:Has anyone else had trouble when replacing their oil filter with the M1 110 oil filter. The starter thread was different and would not screw on. I returned the filter and went with the Pure one oil filter.

 

[VTX_CrossFit71]

thanks for all the info