Honda VTX 1300 / VTX 1800 Motorcycles Forum banner

Bike stalled while warming up now won's start. Suggestions please

1763 Views 12 Replies 8 Participants Last post by  Donut
Ok, I'm new to cycling so I'm probably missing the simple answer needed.
I started my 1300C with no problems this morning (bike in neutral, petcock in on position, choke all the way in) the bike ran for a minute or two while I was getting ready to ride, it then stalled on me.

I tried to start it up again and it would not turn over. I then proceeded to pull the choke out and try to start it - probably flooding the tank, still wouldn't start. I left it for 15 min or so and tried again, choke all the way in this time, held the throttle while trying to start it and still nothing.

My very limited knowledge consists of a MSF class, please help.

Thanks
1 - 1 of 13 Posts
You said " bike ran for a minute or two while I was getting ready to ride, it then stalled on me.

Did you check and make sure you did not hit the "Kill Switch" above the throttle grip, and fuel valve on the pit-cock was pointing down?


Sometimes we tend to overlook the obvious.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top