Good call Mooneydriver!!! That is what you call troubleshooting!!!!!!
Brake Light Stays on after installing New Front Brake Switch
Thank you in advance for your help!
Brakes work But ...... Brake Light Stays on after installing New Front Brake Switch
I ride a 2005 VTX 1300R.
My rear brake light is working correctly when the foot brake is engaged. However, engaging the handbrake did not turn the light on.
I Replaced the handbrake switch. After installing the switch, the brake light remains on. Disconnecting the switch and the foot brake still works fine.
Tried but did not work.
WD40 on the brake lever and foot levers to see if it was stuck.
Check master cylinder and the wires all look fine.
Adjusted the pressure from the foot brake switch, no change.
Tried a second front brake switch in case the first was defective.
I am out of ideas and appreciate any help I can get. Thank you.
Brakes work But ...... Brake Light Stays on after installing New Front Brake Switch
I ride a 2005 VTX 1300R.
My rear brake light is working correctly when the foot brake is engaged. However, engaging the handbrake did not turn the light on.
I Replaced the handbrake switch. After installing the switch, the brake light remains on. Disconnecting the switch and the foot brake still works fine.
Tried but did not work.
WD40 on the brake lever and foot levers to see if it was stuck.
Check master cylinder and the wires all look fine.
Adjusted the pressure from the foot brake switch, no change.
Tried a second front brake switch in case the first was defective.
I am out of ideas and appreciate any help I can get. Thank you.
1 - 1 of 11 Posts
1 - 1 of 11 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda VTX 1300 / VTX 1800 Motorcycles Forum
VTX Cafe Forum is for owners of Honda VTX 1300 or VTX 1800. Join this community to discuss mods, specs, parts & more!
Full Forum Listing
Recommended Communities
