[ennac]

looking for factory exhaust bracket from vtx 1300C, if someone had one laying around , please let me know . thanks

 

[car9cop]

looking for factory exhaust bracket from vtx 1300C, if someone had one laying around , please let me know . thanks

Depending on the reason you need it, you can make an adapter plate for your S bracket so a C exhaust will fit. I have an S and I bought a Roadhouse Classic 2 into 1 exhaust that was made for a C. I just made an adapter plate that moved the S bracket back about 6 inches. I made it out of 1/8 in thick by 1 inch wide steel stock I had laying around. It worked great. Here is a link to what I did. This isn't a picture of mine,but gave me the idea.

http://www.vtxoa.com/forums/showthread.php?t=318040

Hope this helps.:mosh:
http://www.vtxoa.com/forums/showthread.php?t=318040

 

[ennac]

I do have roadhouse dooley, did the same thing, put aluminum bar 1 X 1/4 byt still the bar put it a way far from tire compared to other side, i had close to 1/2 to 3/4 in.
i am trying to get a new hardsaddlebag that will go over the exhaust like the extended hard saddlebag. thats why i am looking for the c model bracket. a guy from vtxoa promissed me he has one and i am meeting him tomorrow , he is about 16 miles from my place .