Honda VTX 1300 / VTX 1800 Motorcycles Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter · #1 ·
Ok so I did the fp jets, pair valve delet and gleen a/f screw today not the smoothest but got it all done I crank the bike and fixed the a/f put in 1st dies dosnt even try to move just dies she idles fun and reves ok but wouldn't go in 1st I used 58 main , 215 slow did I use wrong jets or do I need to fiddle with the a/f screw some more? Also when doing the needle I put in the 4th clip I also seen ppl clipping the tit ( thing the spring sits on) I didn't should have I clipped it? Agian never done this before so any advice is welcomed tia

Ps had to drill on of the carb screws out not really fun
Fluid Gesture Finger Thumb Gas
 

·
Registered
Joined
·
62 Posts
Discussion Starter · #5 ·
And that's what I was curious about so as long as it's moving freely I don't have to clip the tit got it so basically I just need to adjust the a/f screw then
 

·
Registered
Joined
·
62 Posts
Discussion Starter · #10 ·
Ok so update. bike dosnt die in first now come to find out Ben the clip on the needle when I put it back together so had to clip the tit for the needle and she works gonna tune it Friday no time through the week to do it ✌
 
1 - 6 of 6 Posts
Top