[devonuto]

I'm located in Australia, and am about to replace the standard indicators with LEDs, and can't seem to find a replacement flasher (7 pin) relay for 'C' 2006+ 1800s.

Does anyone know where I can find one, or what I need to do to slow down the flash-rate?

I found this: Load Equalizer « Bareass Choppers Motorcycle Tech Pages but it's not relevant for my year model. Looking for a solution like this, but would prefer not to use load equalizers if possible. Obviously an LED compatible flasher relay is ideal.

Cheers,
Steve

 

[Watercop]

Try this: www.customdynamics.com Type " led flasher " in the search...........Enjoy

Watercop

 

[Watercop]

www.superbrightleds.com Try this one also...

Watercop

 

[devonuto]

Thanks, but I was hoping for a plug & play one if possible. Not sure which wires to divert through a different flasher unit?

 

[Watercop]

The one from custom dynamics is a direct replacement.........................

Watercop

 

[devonuto]

The flasher unit on my bike is a 7 pin, so I'd need some sort of wiring diagram if anyone has one?

 

[madaba]

There isn't a direct replacement for us so you will have to use load equalizers to slow it down. The wiring diagram can be found on the bareass site

 

[devonuto]

The bareass site has images of a different year model, so it's not easy to follow for a wiring novice.

 

[devonuto]

Personally I'd rather just bypass the OEM flasher unit by intercepting the required wires, and feed them to an over-the-counter flasher unit. This way I wouldn't have to worry about having "hot" load equalizers mounted somewhere on the bike.

 

[M-2]

There's s plug and play led Flasher that is a direct replacement for the oem Flasher. I have one, took a whole 2 minutes to install. I think baron makes it.

from my Kindle Fire using Tapatalk 2

 

[devonuto]

There's s plug and play led Flasher that is a direct replacement for the oem Flasher. I have one, took a whole 2 minutes to install. I think baron makes it.

Baron?

 

[M-2]

Baron?

Sorry, it was show chrome. http://m.cruisercustomizing.com/sho...-bike-parts-led-flasher-relay/part/BBP-13-306

Sent from my Kindle Fire using Tapatalk 2

 

[devonuto]

Yeah, not sure if I can use those ones. The flasher unit on my bike is a 7 or 8 pin, with about 5 or 6 wires actually plugged into it. I think I'm just going to go the voltage equalizer route.

 

[madaba]

There's s plug and play led Flasher that is a direct replacement for the oem Flasher. I have one, took a whole 2 minutes to install. I think baron makes it.

from my Kindle Fire using Tapatalk 2

1300's use a different relay

 

[M-2]

1300's use a different relay

Oops, my bad, my apologies for the confusion. I didn't see he had an 1800. One of the downsides of using tapatalk is I can't see the bike information at the top of each reply or post.


Sent from somewhere in the deep East Texas Piney Woods using Tapatalk