Honda VTX 1300 / VTX 1800 Motorcycles Forum banner
1 - 9 of 9 Posts

· Chi-Town Darksider
Joined
·
793 Posts
Discussion Starter · #1 ·
I had the opportunity to go directly to Glen's Garage since he worked less than five from my work. I decided to have the permanent a/f toggle and the clutch relief put on my bike. I have a stock intake and exhaust right now but will have gutted stock pipes in this week. I have to say it was a great learning experience being at Glens. Not only did he help with putting the parts on, but he also showed me how to do them and really let me dive into doing it (with his supervision of course). I had a great experience with Glen and his parts made a huge difference. The clutch relief made it feel like butter when I shifted, it was so much easier with the feathering while shifting gears. The a/f made the bike run much smoother and the throttle response was great. Thanks again Glen for not only designing the parts but also for helping a novice motorcycle rider with how to work a little more on his bike!
If you dont have either of these parts, you need to pick them up NOW!!!
If you would like, check out my youtube video I made to not only show these parts, but a before video of my stock pipes and plan on making another when I get the new pipes on.
http://www.youtube.com/watch?v=OKxZDocKVyo
Enjoy!
Jason
 

· Premium Member
Joined
·
10,077 Posts
Nice bike.... and video Jason. I too have installed Glen's Clutch Relief and really makes a difference when clutching. Wishing you well.
 

· Chi-Town Darksider
Joined
·
793 Posts
Discussion Starter · #4 ·
Nice bike.... and video Jason. I too have installed Glen's Clutch Relief and really makes a difference when clutching. Wishing you well.
Thanks for the bike compliment...I was just shocked with the difference it made!
 

· aka "Buddha Bill"
Joined
·
1,188 Posts
I have his 4" headlight ext. It saved my bacon when it came time to put on my Hondaline light bar with my Hondaline windshield!
 

· Registered
Joined
·
425 Posts
Dito, Dito, Dito!!!

I installed Glen's clutch relief, A/F permanent adjustment tool, and the 4" extension. I even had to call Glen when I thought I lost the A/f installation tool. I didn't, it was between the fins where he said it might be. Each one of these has made a great improvement. My hand doesn't get tired shifting, my bike runs so much better with the adjustment to the A/F, and I am amazed at the difference the headlight extension makes. So much more of the chrome on the headlight is available and it is a bitch-en look. Cudos to Glen.:cheers:
 

· Really OLD FART Member
Joined
·
5,190 Posts
I've been stuck on the road two different times in the mountains and, when I could get hold of NO ONE else, I called Glenn for advice at the very least. He called me back both times IMMEDIATELY. If for no other reason than not being stuck mentally alone on the road when no one else, Dealers included, seemed to give a good fat rip as to my predictament...I'm ALL FOR Glenn and his products, whether I have them all now or NOT!!! :cheers:
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top