[Rico2043]

Hi everybody
Can anyone tell me the best way to do internal wiring on CP bars. Photo would be helful. Thanks in advance for any help posted.
Richie M

 

[Green Ghost]

Internal

I just put new bars on the Green Ghost yesterday. I done the internal wiring deal. I took all the pins out of the connectors so I wouldn't have any splices in the wires. ( A Pain in the Butt ) But they a not long enough to run the wire cables threw the bars and behind the trees and keep them out of sight till they get back to the headlight. So I'll have to splice them anyway. If someone don't posts a link where this has already been explained. I'll try to write one this weekend and post with pics.

 

[Rico2043]

Thanks GG
any pics would be helpful. You lost me when you spoke of taking out the pins from the connectors.You said the wires were not long enough to run thru the bars and would have to be spliced. Is that because of the model X you have or would all the models have to be spliced.
Rico

 

[Green Ghost]

Wired

Thanks GG
any pics would be helpful. You lost me when you spoke of taking out the pins from the connectors.You said the wires were not long enough to run thru the bars and would have to be spliced. Is that because of the model X you have or would all the models have to be spliced.
Rico

Hi Rico, After removing the headlight you'll see the conectors in question. You have a 3 blade for the headlight. The other three conectors are plug-in's for the switches on the bars. One RED - Two Black And signals, When unpluged from each other there a male pins in one side and female on the other side. The male pins are what I removed. It will be depending on the Bars you chose as to how much wire you will need to add. Are you installing New Bars? Or are you just running the wires threw your stock bars? If you are installing bars that are shorter than the ones on it now you may not have to splice the wires. I'll try to get something going this weekend. And I can talk you through it no problem. The wires ARE long enough to go threw the bars. I just want more slack to hide the wires so they can't be seen until they get back to the headlight. GG.