Honda VTX 1300 / VTX 1800 Motorcycles Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
So I de-capped the intake and installed the Factory Pro Stage 3 jet kit. My 2008 Vtx 1300c will start up no problem idles fine, but when you go to give it any throttle it stalls out. You can very slowly increase throttle but before a 1/4 turn it starts to stall out. I installed the 210 main jet, 58 pilot jet, and the needle is clipped 4th from the blunt end, and a/f screw is turned out 2 1/4 turns. From the research I've done i think its either the pilot jet or the needle is in the wrong spot, but I'm not very experienced with carburetors. Thanks you for any help, God Bless.
 

·
Reeling Jackwagon
2003 1300S
Joined
·
9,234 Posts
All I can say is read this
 
1 - 3 of 3 Posts
Top