[TUCKER]

:hmm2: Greatly disturbed to find out that the diagrams available for my '02 VTX 1800 are wrong and I can't get the right part! Ordered a Reflector Set, FR for may radiator shroud. Got them in and found that they do not match the originals. Part number on their exploded diagram was pt.no. 33745-MBA-670 and the same on the other four sites I checked. The diagrams do not show any holes in the radiator side covers and no mounting studs on the reflectors. I had ordered in a replacement chrome cover from SHOWCHROME and it has the pre-drilled holes for the reflector studs, just like the stock side covers! I even tried looking at other VTX 1800 models diagrams to see if they showed the holes or the mounting studs, they don't. The ad for the SHOWCHROME cover even stated that it was pre-drilled for the stock reflectors. All I wanted to do was mount new reflectors on my new cover, and I can't find a part match! HELP!!! P.S. The new reflectors have a self-adhesive pad on the back but no studs!!!

 

[MerwinT]

http://www.hdlparts.com/fiche_section_detail.asp

REFLECTOR, FR.
33741-ME9-673

This part number is for a 2001, 1100c. It is the reflector with the stud. Take a look. In the first model year production run its common for a manufacturer to use up small items from other models and years to assemble units. It would not surprise me if this is your part. good luck!:cheers:

I should tell you that it would not surprise me if this part number has been replaced by the number you already have.

 

[TUCKER]

Thanks Dude! I've Checked-out The Diagram And Its Possible It Could Fit. However, Mine Mounts With A Molded Into The Reflector Body Stem With A Spring Clip On The Inside To Hold It In Place. I Did Get A Reply From The Parts Vendor About My Problem Today And They Are Asking For My Vin. Number To Try And Find A Match. If They Can't I'll Order The 1100c Style. Thanks Again My Friend!