Honda VTX 1300 / VTX 1800 Motorcycles Forum banner

Risors for an 05 Neo

1238 Views 8 Replies 6 Participants Last post by  R1Mike
I've got a little information overload on this. There is a LOT of stuff on risors, but of course, I didn't find what I need. :(

I've got an 05 Neo that I want to get the bars a couple of inches closer to me. Not higher, just closer. Also, I don't want to get into changing cables or hoses. Can someone point me in the right direction?

Thanks and ride safe:choppersm
1 - 1 of 9 Posts
I recently bought a used chrome set from the Beefy off of his N.. same cable length, just reroute them behind the tree’s.. 2” more up and 3’ more back… here's the link below....


PhatRisers II™ by Scootworks- Now also available in Black and SHOW CHROME! - These handlebar risers were created especially for 'vertically challenged' riders and folks who just want _more_ pullback! Raises the bars 2" above that of the OEM Honda mount, and pulls your grips back 3" closer to you. Works with original cables/hoses (except as noted for the PhatRisers™ above), but requires you to reroute them behind the triple tree in some applications. PERFECT for riders with short arms or being 5'5" or shorter. Weighing in at over 1.6 lbs each, these hefty risers come with the same great features as our PhatRisers™ above, and are available now! Prices are: $119.95 (Micro-Polished), $119.95 ( black), $144.95 (Show Chrome), $154.95 (Flames)
-> PhatRisers II™ for VTX 1800 Retro, S, T, Neo, & 1800F (NOTE on 1800F - These move the bars up approx 1" and back approx 1-1/2" on the 1800F)-
See less See more
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.