Honda VTX 1300 / VTX 1800 Motorcycles Forum banner

spark plug wire help

2208 Views 4 Replies 4 Participants Last post by  wayne
i have a melted park plug wire due to exhaust leak and i can not find a thread on how to replace this and is there a up grade from stock such as a higher resistance to heat and better continunity (i thinks thats how you spell it)
help!!!!
thanx
See less See more
1 - 1 of 5 Posts
The wire pushes into the coil. Just unscrew the cap on the end of the coil and the wire will pull out. Don't lose the grommet and compression ring inside the cap, you'll need them for the new wire. The plug boot screws onto the wire. Just unscrew the boot. The boot has a resistor built into it, so use the stock boot. The insulator on the wire will pull off with a little silicone spray on the wire. It will slide on the new wire too. You can use any wire core plug wire. Call auto parts stores and ask for wire core spark plug wire in bulk. I found it at NAPA for 0.49 a ft. Route the new wire away from the exhaust and fix the leak.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top