Honda VTX 1300 / VTX 1800 Motorcycles Forum banner

Still poping

806 Views 3 Replies 4 Participants Last post by  blackdot
I have Samson Rip Saw pipes I don't think they have any baffles in them they were on the bike when I bought it. I have done all the mods I have taken off all unused vacuum hose's. The only vacuum lines I have one from the manifold that tee's off to the shut off valve then to a tee that goes to the crab and the other to my Hyper charger,It runs good I do the blip on the throttle it comes right back to idle. But it still I don't want to call it back firing but it does do a lot of popping.
Any answers
1 - 1 of 4 Posts
An exhaust leak can do that. The acorn nuts torque to 17ft/lbs. Make sure they are not bottoming on the studs, might need to add a washer if they are.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.