Honda VTX 1300 / VTX 1800 Motorcycles Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
i have a 03 1300 r. put on v&A big shots pipes with the "quiet baffles" and a baron BAK. 210 main jet 4 clips down ans 2.5 turns out on the A/f. runs good at top end horrible at the bottom. seems entirely too rich. usinf FP jets buut called DJ for support and they swore the carb setuup should be perfect. at a loss as to what to do
 

· Registered
Joined
·
7,404 Posts
i have a 03 1300 r. put on v&A big shots pipes with the "quiet baffles" and a baron BAK. 210 main jet 4 clips down ans 2.5 turns out on the A/f. runs good at top end horrible at the bottom. seems entirely too rich. usinf FP jets buut called DJ for support and they swore the carb setuup should be perfect. at a loss as to what to do
What slow jet is in there.
2.5 is probably too much
I'd go to the 210 and 4th clip and a/f at 1 3/4 to 2 turns.
Or like I have 58 slow 215 main a/f at 1 3/4 to 2.

Donut:patriot:Doug
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top